Single Phase Digital Din Rail KWH Meter LCD Display Measurement Active Energy
Functions and Features:
＊ 35mm standard DIN rail installation, complying with standard DIN EN50022; Or front board setting (mounting holes center distance 63mm), users can choose any one by themselves;
＊ Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993;
＊ Standard configuration 6+1 digits display (999999.1kWh). May select 5+2 digits display (please specified when ordering);
＊ Seven digits LCD monitors standard configuration impulse output passive (polarity), may select increase a distant impulse output passive (no polarity),And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864;
＊ Two LED instructions respectively power state (green) and signal of power impulse (red);
＊ Standard configuration don’t detect direction of the trend of load current. May select automatic detecting the direction of the trend of load current and instructions by an individual LED;
＊ Single direction measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
＊ Standard configuration type S connection (Inlet from bottom, outlet from top) for direct connect to use, we can also choose another type of connection, and use CT and PT &CT for operation;
＊ Extended terminal cover, in order to protect to use electricity safely, may select short terminals cover.
Technical Parameters:
| Model | Accuracy | Rated Voltage (V) | Rated Current (A) | Starting Current (A) | Insulation Performance |
| RDK100SC | CL 1.0 CL 2.0 | 220V 120V | 2.5(10)A, 3(15)A 5(20)A, 10(30)A 15(90)A, 20(100)A 5(40)A, 5(100)A | 0.04% Ib 0.05% Ib | AC voltage 2kV for 1 minute, impulse voltage 6kV. |
Application:
Model RDK100SC single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, using advanced technique of digital and SMT techniques, etc.
It has completely its independent intellectual property rights and minimum size, and also a new single phase two wire active energy meter. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21.
It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, this meter has seven digits LCD monitors shows the active energy power consumption, it has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, and etc.
Outer nd mount dimension:
Wiring Diagram:
Product Tags:
|
|
220 / 120V Din Rail Energy Meter , Single Phase KWH Meter With LCD Display Images
|
